Double Glazing Seal Repairs
If the seals on double-glazed windows are damaged they could cause damp and mould. This could cause damage to the frame and walls surrounding it and impact your health.
Resealing is a cost-effective method to repair the majority of uPVC window frames than to replace them. A glazier can clean the frame and glass of the window, apply a new bead and smooth it.
Water Leaks
Window seals are designed to keep water to stay out of your home. But, when they begin to break down, it can result in water leaks around your windows. A window that leaks isn't only annoying but it can cause significant damage to the surrounding structure of your home. It is important to identify the issue early and get it repaired by an expert before it gets worse.
Often, the source of your leaking windows isn't in the glass itself but rather on the frame and sill. A leak in this region is the most typical indication of a damaged window seal. This can be due to damage to the seal caused by weather or age or worn caulking or even a blocked drain which can lead to the accumulation of ice or water.
Another indication of a window seal failing is the appearance of water between the panes of your double-glazed windows. This isn't as hazardous as a leak from water, as the water does not travel far enough to get into your home. However, it does mean that the inert gasses that are trapped between your panes have leaked out. This will reduce the effectiveness of the insulation in your window.
Condensation in between the panes is another sign of a leaky seal. This may be caused by the window seal failing, or it could be the result of a damp climate in your home or a problem with the glass. The condensation can not only be a nuisance, but it could cause the development of mildew and mould within your home, which can be very difficult and expensive to remove.
It's time to check your double-glazed windows if you observe these indications. Repairs or replacements will help protect your home from water leaks, lower the cost of energy, and also keep out draughts. It's a small price to pay to ensure the safety and comfort of your family. Contact Thompson Creek Window today to discuss your options for a window seal repair or replacement. Our knowledgeable professionals are ready to help! We serve homeowners throughout the Mid-Atlantic region.
Condensation
A damaged double-glazing seal could allow water to enter the insulating space. This water could cause fogging or misting to the window panes.
If you are noticing condensation inside your home you should contact an expert in double glazing repair . Condensation is a sign that the vacuum seal drawn at the factory has failed and water is leaking into the insulated gap.
Condensation can be caused by a variety of factors but it is usually the result of faulty gaskets and sealants, as well as insulation within the uPVC frame of the windows. In the end there are different double glazing repair options, but it is vital that the seal you choose to replace is correctly designed to ensure a perfect fit and a water-tight seal.
Typically gaskets used to seal the gaps between double-glazed units are made from polyurethane foam. They are designed to be long-lasting but they can perish in time due to natural wear and tear as well as exposure to various temperatures and weather conditions throughout the year.
Over time, the foam may shrink or crack. This can lead to cracks in your seal, allowing moisture to get into the double-glazed window. This can cause condensation, but it could cause a loss of energy efficiency, meaning that you're losing heat from your home to the outside air.
Re-sealing windows is one solution to this issue. This is not a guaranteed solution as it will remove the existing condensation and not address the issues that cause the double-glazed windows to leak or create condensate.
A professional who can offer an insurance-backed guarantee should replace your windows in full. If the company fails, you are still covered by insurance. It is important to remember that your replacement windows should have a warranty of at minimum 10 years.
Misting
As the fall months get closer it's a good idea to make sure that your double glazing seals are in good condition. Window seals that are damaged or worn out do don't just affect the insulation properties of your windows but can also lead to condensation, mold, and damp. To prevent further damage to your double-glazed windows and save money on energy bills It is important to address any issues as quickly as you can.
Double-glazed windows are made of two glass panes which are joined by a gas-filled interior space. The sealant layer on the outside fills the gap between uPVC frames and the glass. This is essential to maintain the air-tight sealing that keeps warm and cool air from your home, saving money on your heating bills. These seals are susceptible to damage in time due to weather conditions, ageing or poor installation. When this happens the encapsulation formula that makes your double-glazed windows so efficient can begin to lose its effectiveness.
If the seals are damaged or defective and are not fixed, they can lead to dampness and condensation, which could affect your health as well as the appearance of your window. The presence of mould and damp can cause damage to your floors, walls and ceilings, but they also create allergens and irritants within your home that could be harmful to you and your family's health.
One of the most frequent problems that can happen to your double glazing is that it can leak between the panes. This happens when moisture gets inside the insulated section of your windows. It isn't easy to fix without professional double-glazing repair.
DIY solutions to this problem are available, however we advise against them as they can be messy and cause damage to your windows. These methods involve drilling into your glazed unit and using chemicals to remove fog & condensation. This can lead to a number of complications including exposing your windows to water damage that could cause the entire unit to be destroyed.
Professional glaziers possess the tools and skills to properly reseal uPVC frames. They can also give you lasting results. Additionally they can also provide advice on the best ways to keep your uPVC windows in good shape to prevent any future problems.
Draughts
A draft that is coming from your window means that the sealant may have broken down. It needs to be repaired or replaced. This will stop cold air from entering your home, increase efficiency in energy use and lower heating bills and improve comfort levels and indoor temperature control.
It is also important to remember that not all draughts come from the window seals themselves but from the gap between the frame and the bricks. In some instances, it might be possible to repair this by simply caulking the gap. If this doesn't work, it will require the seal to be professionally repaired.
If the sealant around double-glazed windows starts to breakdown and allows water to infiltrate. This can cause dampness or even mold. This could have a negative impact on health and could be damaging to property. It is important to address any water leaks when you spot them. If your windows are still under guarantee it is worth checking with the company you purchased them from, since they could pay for the repairs.
It is important to determine whether the windows are covered under a warranty. Certain companies offer lifetime guarantees and others offer 10 years. If your double-glazed windows are under warranty, it's worth calling the company you bought the windows from as soon as possible and giving them the details of any issues that you're experiencing. It is best to contact the company in person, or by letter and email. This will ensure that everything is clearly documented and easily understood.
It is also important to remember that draughts can often be caused by damaged hinges, rather than the absence of seals that are effective. The hinges are located close to the window sash which is the part that you open. If they're not regularly oiling them they could become stiff. This can cause a gap to develop between the frame of the sash and the sash, allowing cold air into the house. Replacing these hinges will solve this problem without affecting the window seals.